top of page
ISS banner.jpg

OnSite Security 
Testing Utility

This form will walk you through conducting a self-test with your alarm system for the Door Contacts and Interior Motions in 2 easy steps!  This Self-Test will take approximately 15 minutes.

1993 PANDA EXPRESS

Your Security Zones

Below is a listing of zones identified for your location to test.  You will use this for reference.

0
TEST SIGNAL
1
SIDE DOOR CONTACT
2
FRONT DOOR CONTACT
3
SERVICE DOOR
4
ROOF HATCH CONTACT
5
DRIVE THRU WINDOW CONTACT
6
POS PANIC
7
DRIVE THRU POS PANIC
8
MANAGER PANIC
9
FREEZER PANIC
10
FRONT DINING MOTION
11
SIDE DINING MOTION
12
MANAGER MOTION
13
DRIVE THRU WINDOW MOTION

TO PERFORM TEST, SYSTEM MUST SHOW GREEN READY LIGHT ON THE KEYPAD.

THIS REQUIRES NO MOVEMENT IN THE RESTAURANT.

Step 1

Start by placing the Alarm system in Test Mode at the Keypad.  

  • Enter the code 4112 (this code is used for testing the Alarm System only)

  • Then Press 5

  • Then press "0" for "0=Walk"

  • You will hear a short 2-second siren blast. The siren will be loud, please alert additional staff in the store for preparation. This is normal and means the battery is operating in the panel correctly.

Step 2 keypad.png

Step 2

Begin testing the Door Contacts and Interior Motions.

We recommend testing with a colleague:  one person to walk the floor, and one person by the keypad watching the display. When a device within a zone is triggered, you will hear a chime at the keypad. The keypad will display "Fault" with the zone number or zone description.

Fault 3 keypad.png

Once you close the zone, or the zone clears, the display will return to showing "Test In Progress".

Test in Progress keypad.png

To test a Door Contact, open and close the door.

To test an Interior Motion sensor, we recommend walking across the path of the motion, and under the motion (please see example image below).

Testing Interior Motion Sensors-2.png

Mark a PASS if you heard the chime and saw the zone on the keypad.

Mark a FAIL if you did not hear the chime and did not see the zone on the keypad.

Zone ID

Zone Description

Pass/Fail

0

TEST SIGNAL

Pass

Fail

Please select a result!

1

SIDE DOOR CONTACT

Pass

Fail

Please select a result!

2

FRONT DOOR CONTACT

Pass

Fail

Please select a result!

3

SERVICE DOOR

Pass

Fail

Please select a result!

4

ROOF HATCH CONTACT

Pass

Fail

Please select a result!

5

DRIVE THRU WINDOW CONTACT

Pass

Fail

Please select a result!

6

POS PANIC

Pass

Fail

Please select a result!

7

DRIVE THRU POS PANIC

Pass

Fail

Please select a result!

8

MANAGER PANIC

Pass

Fail

Please select a result!

9

FREEZER PANIC

Pass

Fail

Please select a result!

10

FRONT DINING MOTION

Pass

Fail

Please select a result!

11

SIDE DINING MOTION

Pass

Fail

Please select a result!

WHEN FINISHED, ENTER YOUR 4-DIGIT CODE, THEN PRESS 1 TO REMOVE FROM TEST MODE.

Great job!

Thank you for completing the self-test!

Your responses will be reviewed by Interface Systems, and appropriate steps will be taken as necessary.

Have a great day!

Your content has been submitted

bottom of page