OnSite Security
Testing Utility
This form will walk you through conducting a self-test with your alarm system for the Door Contacts and Interior Motions in 2 easy steps! This Self-Test will take approximately 15 minutes.
2156 PANDA EXPRESS
Your Security Zones
Below is a listing of zones identified for your location to test. You will use this for reference.
1 | SERVICE DOOR CONTACT |
2 | DRIVE THRU WINDOW CONTACT |
3 | ROOF HATCH CONTACT |
4 | SOUTH DINING MOTION |
5 | NORTH DINING MOTION |
6 | DRIVE THRU WINDOW MOTION |
7 | MANAGERS STATION MOTION |
18 | FRONT DOOR CONTACT |
19 | SOUTH SIDE DOOR CONTACT |
20 | NORTH SIDE DOOR CONTACT |
TO PERFORM TEST, SYSTEM MUST SHOW GREEN READY LIGHT ON THE KEYPAD.
THIS REQUIRES NO MOVEMENT IN THE RESTAURANT.
Step 1
Start by placing the Alarm system in Test Mode at the Keypad.
-
Enter the code 4112 (this code is used for testing the Alarm System only)
-
Then Press 5
-
Then press "0" for "0=Walk"
-
You will hear a short 2-second siren blast. The siren will be loud, please alert additional staff in the store for preparation. This is normal and means the battery is operating in the panel correctly.
Step 2
Begin testing the Door Contacts and Interior Motions.
We recommend testing with a colleague: one person to walk the floor, and one person by the keypad watching the display. When a device within a zone is triggered, you will hear a chime at the keypad. The keypad will display "Fault" with the zone number or zone description.
Once you close the zone, or the zone clears, the display will return to showing "Test In Progress".
To test a Door Contact, open and close the door.
To test an Interior Motion sensor, we recommend walking across the path of the motion, and under the motion (please see example image below).
Mark a PASS if you heard the chime and saw the zone on the keypad.
Mark a FAIL if you did not hear the chime and did not see the zone on the keypad.
Zone ID
Zone Description
Pass/Fail
1
SERVICE DOOR CONTACT
Pass
Fail
Please select a result!
2
DRIVE THRU WINDOW CONTACT
Pass
Fail
Please select a result!
3
ROOF HATCH CONTACT
Pass
Fail
Please select a result!
4
SOUTH DINING MOTION
Pass
Fail
Please select a result!
5
NORTH DINING MOTION
Pass
Fail
Please select a result!
6
DRIVE THRU WINDOW MOTION
Pass
Fail
Please select a result!
7
MANAGERS STATION MOTION
Pass
Fail
Please select a result!
18
FRONT DOOR CONTACT
Pass
Fail
Please select a result!
19
SOUTH SIDE DOOR CONTACT
Pass
Fail
Please select a result!
20
NORTH SIDE DOOR CONTACT
Pass
Fail
Please select a result!
WHEN FINISHED, ENTER YOUR 4-DIGIT CODE, THEN PRESS 1 TO REMOVE FROM TEST MODE.
Great job!
Thank you for completing the self-test!
Your responses will be reviewed by Interface Systems, and appropriate steps will be taken as necessary.
Have a great day!
Your content has been submitted