top of page
ISS banner.jpg

OnSite Security 
Testing Utility

This form will walk you through conducting a self-test with your alarm system for the Door Contacts and Interior Motions in 2 easy steps!  This Self-Test will take approximately 15 minutes.

34005 RAISING CANES

Your Security Zones

Below is a listing of zones identified for your location to test.  You will use this for reference.

8
MANAGER OFFICE MOTION
10
CASH WINDOW MOTION
11
PICK UP WINDOW MOTION
18
MANAGER OFFICE DOOR CONTACT
19
HALLWAY 360 MOTION
1
FRONT DOOR CONTACT
2
REAR DOOR CONTACT
3
SIDE EMERGENCY DOOR CONTACT
4
CASH SLIDING WINDOW CONTACT
5
PICK UP SLIDING WINDOW CONTACT
6
FRONT MOTION
7
SIDE MOTION

TO PERFORM TEST, SYSTEM MUST SHOW GREEN READY LIGHT ON THE KEYPAD.

THIS REQUIRES NO MOVEMENT IN THE RESTAURANT.

Step 1

Start by placing the Alarm system in Test Mode at the Keypad.  

  • Enter the code 4112 (this code is used for testing the Alarm System only)

  • Then Press 5

  • Then press "0" for "0=Walk"

  • You will hear a short 2-second siren blast. The siren will be loud, please alert additional staff in the store for preparation. This is normal and means the battery is operating in the panel correctly.

Step 2 keypad.png

Step 2

Begin testing the Door Contacts and Interior Motions.

We recommend testing with a colleague:  one person to walk the floor, and one person by the keypad watching the display. When a device within a zone is triggered, you will hear a chime at the keypad. The keypad will display "Fault" with the zone number or zone description.

Fault 3 keypad.png

Once you close the zone, or the zone clears, the display will return to showing "Test In Progress".

Test in Progress keypad.png

To test a Door Contact, open and close the door.

To test an Interior Motion sensor, we recommend walking across the path of the motion, and under the motion (please see example image below).

Testing Interior Motion Sensors-2.png

Mark a PASS if you heard the chime and saw the zone on the keypad.

Mark a FAIL if you did not hear the chime and did not see the zone on the keypad.

Zone ID

Zone Description

Pass/Fail

8

MANAGER OFFICE MOTION

Pass

Fail

Please select a result!

10

CASH WINDOW MOTION

Pass

Fail

Please select a result!

11

PICK UP WINDOW MOTION

Pass

Fail

Please select a result!

18

MANAGER OFFICE DOOR CONTACT

Pass

Fail

Please select a result!

19

HALLWAY 360 MOTION

Pass

Fail

Please select a result!

1

FRONT DOOR CONTACT

Pass

Fail

Please select a result!

2

REAR DOOR CONTACT

Pass

Fail

Please select a result!

3

SIDE EMERGENCY DOOR CONTACT

Pass

Fail

Please select a result!

4

CASH SLIDING WINDOW CONTACT

Pass

Fail

Please select a result!

5

PICK UP SLIDING WINDOW CONTACT

Pass

Fail

Please select a result!

6

FRONT MOTION

Pass

Fail

Please select a result!

7

SIDE MOTION

Pass

Fail

Please select a result!

WHEN FINISHED, ENTER YOUR 4-DIGIT CODE, THEN PRESS 1 TO REMOVE FROM TEST MODE.

Great job!

Thank you for completing the self-test!

Your responses will be reviewed by Interface Systems, and appropriate steps will be taken as necessary.

Have a great day!

Your content has been submitted

bottom of page