top of page
ISS banner.jpg

OnSite Security 
Testing Utility

This form will walk you through conducting a self-test with your alarm system for the Door Contacts and Interior Motions in 2 easy steps!  This Self-Test will take approximately 15 minutes.

850 PANDA EXPRESS

Your Security Zones

Below is a listing of zones identified for your location to test.  You will use this for reference.

0
SYSTEM
1
FRONT DOORS CONTACT
2
SIDE DOORS CONTACT
3
REAR DOOR CONTACT
5
ROOF HATCH CONTACT
6
WESTE DINING MOTION
7
EAST DINING MOTION
8
OFFICE AND BACK ROOM MOTION
9
INTERFACE PHONE
13
DRIVE THRU MOTION

TO PERFORM TEST, SYSTEM MUST SHOW GREEN READY LIGHT ON THE KEYPAD.

THIS REQUIRES NO MOVEMENT IN THE RESTAURANT.

Step 1

Start by placing the Alarm system in Test Mode at the Keypad.  

  • Enter the code 4112 (this code is used for testing the Alarm System only)

  • Then Press 5

  • Then press "0" for "0=Walk"

  • You will hear a short 2-second siren blast. The siren will be loud, please alert additional staff in the store for preparation. This is normal and means the battery is operating in the panel correctly.

Step 2 keypad.png

Step 2

Begin testing the Door Contacts and Interior Motions.

We recommend testing with a colleague:  one person to walk the floor, and one person by the keypad watching the display. When a device within a zone is triggered, you will hear a chime at the keypad. The keypad will display "Fault" with the zone number or zone description.

Fault 3 keypad.png

Once you close the zone, or the zone clears, the display will return to showing "Test In Progress".

Test in Progress keypad.png

To test a Door Contact, open and close the door.

To test an Interior Motion sensor, we recommend walking across the path of the motion, and under the motion (please see example image below).

Testing Interior Motion Sensors-2.png

Mark a PASS if you heard the chime and saw the zone on the keypad.

Mark a FAIL if you did not hear the chime and did not see the zone on the keypad.

Zone ID

Zone Description

Pass/Fail

0

SYSTEM

Pass

Fail

Please select a result!

1

FRONT DOORS CONTACT

Pass

Fail

Please select a result!

2

SIDE DOORS CONTACT

Pass

Fail

Please select a result!

3

REAR DOOR CONTACT

Pass

Fail

Please select a result!

5

ROOF HATCH CONTACT

Pass

Fail

Please select a result!

6

WESTE DINING MOTION

Pass

Fail

Please select a result!

7

EAST DINING MOTION

Pass

Fail

Please select a result!

8

OFFICE AND BACK ROOM MOTION

Pass

Fail

Please select a result!

9

INTERFACE PHONE

Pass

Fail

Please select a result!

13

DRIVE THRU MOTION

Pass

Fail

Please select a result!

WHEN FINISHED, ENTER YOUR 4-DIGIT CODE, THEN PRESS 1 TO REMOVE FROM TEST MODE.

Great job!

Thank you for completing the self-test!

Your responses will be reviewed by Interface Systems, and appropriate steps will be taken as necessary.

Have a great day!

Your content has been submitted

bottom of page